Project Manager - Mumbai / Noida

Project Manager - Mumbai / Noida

Hi,

Here the placement for Project Manager - Mumbai / Noida

• Our clients are the world leader in providing electronic securitysystems, fire protection, detection and suppression systems,sprinklers and fire extinguishers.
• With more than 10,000 employees, their products and services are usedto safeguard firefighters, prevent fires, deter thieves and protectpeople and property.
• They have immediate openings for Project Managers at Mumbai & Noida.

Project Manager - Mumbai / Noida

Educational Qualifications and Experience

• B.E. in Mechanical/Chemical
• Knowledge of Electrical/Electronic systems will be an added advantage.

Experience :

• 11-15 yrs in project management out of which 3 to yrs experience inproject execution of
• Mechanical systems (HYDRANT, SPRINKLER, FOAM /SPRAY).
  Experience in handling large value (INR 300 Mn) projects independently in an EPC model company.

Requirements :

• Well versed in computer skills, knowledge on planning tools like MS
  Projects, Primavera etc.
• Fluent in written and verbal communication (English and Hindi).
  Ability to understand and comment on the contract documents.
• Give guidance in execution of project to the team.

Responsibilities

• Review the PP2 & prepare the monthly revenue and billing forecast.
• Monitor on the project progress and indicate the green/red flags.
• Coordinate & provide material and all other resources support to the
  project execution team.
• Monitor the outstanding commitment reports, cost to go, work in
  progress, invoicing backlog & revenue backlog every 15 days.
• Review the gross margin (GM) and make provisions / releases on monthly basis.
• Submit weekly site progress report to the management.
• Identify dependencies causing delay in project execution & guide the team.
• Identify & approve sub-contractor.
• Review and approve the sub-contractor’s R.A bills
  Ensure all the EHS practices are implemented at site.
• All incidents / near misses to be reported the management within 24
  hours in the prescribed incident report format
• Ensure invoices are submitted to the client on time and follow up for
  payment from client.
• Ensure time sheets are submitted on weekly basis.
• Identity the requirement and ensure the right talent is being recruited.
• Conduct weekly review with all the project managers.

Authorities

• Can make technical/commercial decision independently for the benefit of the
• company/client.
• Handle projects independently.

Key Result Areas

• Timely execution of projects
• Effective Planning of projects
• Effective co-ordination with internal departments
• Meet the deadlines

Would you be interested ?
Please email your updated resume to radha@kbsconsultants.com
You may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants

Flat H,Kulothungan Apts,

No, 5 Natesan Road

Ashoknagar,

Chennai 600 083.India

Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com/
SAP ERP Jobs : http://www.jobsvista.com/
Core Engineering Jobs : http://www.gotachance.com/
Technology Jobs : http://www.kbsconsultants.com/
India Jobs : http://www.kbsconsultants.net.in/
http://www.kbsconsultants.org.in/

T-Band Marketing

T-Band Marketing


Hi,
Here the placement for T-Band Marketing.

Job Profile:

Key Result Areas

• Throughput Contribution.
• Efficient use of Capital.
• Operating Expense Control.

Job Description

The vacancy is in the Sales and Marketing department of PED.

The incumbent will be responsible for:

• Keeping an update of market intelligence relevant to the process industry.
• Identifying new potential customers and establishing initial contact with them.
• Making capabilities presentation to the clients.
• Organizing shop surveys by new customers.
• Generating enquiries and prioritizing them to ensure optimum use of available resources and to achieve best focus on best prospects.
• Generating profitable orders.
• Developing and maintaining a close working relationship with Domestic and International customers.
• Developing working relationship with inter functional departments viz.
• Design and Estimation, PMC and Manufacturing.
• Ensuring timely collection of advances and final payments.
• Supporting Sales Personnel of other territories, whenever required, through generating recommendations from customer offices located within the assigned territory.
• Training and Development of subordinates on a continuous basis.
• Identifying potential opportunities for Promotional and Publicity events.

Requisite Qualifications

Essential:

• Degree/Diploma in Mechanical/Metallurgy/Fabrication/Production

Requisite Experience

Essential

• 10 to12 years in Marketing of Industrial Products with special emphasis on fabricated critical equipments used in the process industry.

Preferred :

• Critical Process Equipment

Special Skills Required:

• Product Knowledge of Heat Exchanger, Reactor and Vessels, Tower Internals and Trays.
• In depth knowledge and understanding of design codes such as ASME, ADM, PD5500 and others.
• Market Knowledge and clear understanding of business environment.
• Communication and Presentation Skills.
• Negotiation Skills.
• Leadership

Please send us your latest updated profile with contact nos.Current and expected salary details and joining time required to priya@kbsconsultants.comYou may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants
Flat H,Kulothungan Apts,
No, 5 Natesan RoadAshoknagar,
Chennai 600 083.
IndiaPhone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com/

SAP ERP Jobs : http://www.jobsvista.com/

Core Engineering Jobs : http://www.gotachance.com/

Technology Jobs : http://www.kbsconsultants.com/

India Jobs : http://www.kbsconsultants.net.in/

http://www.kbsconsultants.org.in/

T Band Manufacturing

Hi,
Here the placement for T Band Manufacturing.

Job Profile

Key Result Areas:

• Throughput Contribution
• Capital Efficiency
• Operating Expenses Control
• Safety and Housekeeping
• Rework Control
• On – Time Delivery
• Discipline and Productivity
• Develop working relationship
• with inter functional departments.

Job Description
The position is in the Manufacturing Department of Process Equipment Division.

The incumbent will be responsible for the following roles and responsibilities:

• Formulate and implement manufacturing strategy, which is inline with the divisional business strategy.
• To ensure the production as per plan and as per the requirement of various international codes like ASME, TEMA, A D MERKBLATTER, PRESSURE EQUIPMENT DIRECTIVE REQUIREMENTS, and CHINESE SQL REQUIREMENTS etc.
• To ensure productivity of each workmen and machine as per the set standard/ norm.
• To ensure discipline is maintained in shop as per company rule.
• To ensure all manufacturing expenses remain lower than the budget.
• To ensure safe practices are followed.
• Adopting new ways and means that translates in getting higher productivity, better quality
• products at lower cost.
• Maintaining good working environment, safe practices and good housekeeping.

Requisite Qualifications

Essential :

• Degree or Diploma in Mechanical / Production

Requisite Experience

Essential:

• 10 to 15 Years in Fabrication Industries dealing with Manufacturing of Heat Exchangers, Pressure Vessels, Columns, Reactors.

Preferred:

• Relevant experience in Fabrication / Welding required as per International Codes like ASME, A D Merkblatter, TEMA, Pressure Equipment Directive Requirements, Chinese SQL Requirements, experience of Manufacturing secondary reformers, PP reactors etc.
• Consistent track record of high on time delivery performance.

Special Skills Required:

• Knowledge of sequence of Manufacturing and processes, International codes and Procedures, Baan, ISO systems and procedures, Safety procedures and systems.
• Knowledge of Planning tools like Primavera, MS Projects, Planning andProject Management.
• Experience of people management and shop floor.
• Leadership Quality and Interpersonal Skills.

Please send us your latest updated profile with contact nos.
Current and expected salary details and joining time required to priya@kbsconsultants.comYou may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants

Flat H,Kulothungan Apts,

No, 5 Natesan RoadAshoknagar,

Chennai 600 083.

IndiaPhone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com/
SAP ERP Jobs : http://www.jobsvista.com/
Core Engineering Jobs : http://www.gotachance.com/
Technology Jobs : http://www.kbsconsultants.com/
India Jobs : http://www.kbsconsultants.net.in/
http://www.kbsconsultants.org.in/

P Band Manufacturing Engineering i.e. Production Engg

P Band Manufacturing Engineering i.e. Production Engg

Hi,

Here the placement for P Band Manufacturing Engineering i.e. Production Engg

• Throughput Contribution
• Capital Efficiency
• Operating Expenses Control
• Automation and Plant Modernization
• Procurement and Planning

Job Description :

• The Candidate will be responsible to look after the activities related to Manufacturing Engineering in one of the two production areas given and will report to Head of Manufacturing Engineering.
• The Candidate will be responsible to study the drawings in detail and plan out for all necessary dummy items required to facilitate the correct method of manufacturing.
• The Candidate will give the material requirement of these dummy items to PMC.
• The Candidate will facilitate the fabrication/machining of these fixtures, both in-house and outside, so that the items are made inline with the desired results.
• The Candidate will review the progress of all these items and ensure that they are made ready before needed on the job.
• The Candidate will also help manufacturing by designing the regular manufacturing tools, like stands, lifts, platforms etc.
• The Candidate will work with vendors/other departments to plan and implement areas for automation in manufacturing.
• The Candidate will carry out work, time and motion study, as assigned by his department head
• The Candidate will design with or without the help of design dept., all jigs and fixtures needed to control welding distortions.
• The Candidate will be co-ordinating with PMC and others to see that these jigs and fixtures are made ready in time.
• The Candidate will assist his department head in carrying out the activities listed in ‘A’

Activities are:

• Review of Engineering drawings (post order) /data sheets (pre order) and look at the manufacturability of the equipments w.r.t. available resources.
• He will be attending Design review meetings, to look at the manufacturability of drawings and suggest all new non-standard jigs and fixtures needed.

Essential Qualification:

• B.E / B.Tech/ Diploma in Mechanical / Production.

Essential Experience:

• Minimum 5 Years in Production Engineering in Fabrication Industries dealing with Manufacturing of Heat Exchangers, Pressure Vessels, Columns, Reactors etc.

Preferred Experience:

• Relevant experience in Fabrication / Welding required as per International Codes like ASME, A D Merkblatter, TEMA etc

Special Skills Required:

• Knowledge of sequence of Manufacturing and processes, International codes and Procedures, Baan, ISO systems and procedures.
• Procurement Procedures, Time and Motion study exercise
• Knowledge of Planning tools like Primavera, MS Projects, and Planning and Project Management.
• Leadership skills
• Interpersonal skills

Please send us your latest updated profile with contact nos.
current and expected salary details and joining time required to priya@kbsconsultants.comYou may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants
Flat H,Kulothungan Apts,
No, 5 Natesan Road
Ashoknagar,
Chennai 600 083.
India.
Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com/

SAP ERP Jobs : http://www.jobsvista.com/

Core Engineering Jobs : http://www.gotachance.com/

Technology Jobs : http://www.kbsconsultants.com/

India Jobs : http://www.kbsconsultants.net.in/

http://www.kbsconsultants.org.in/

Design - T band Job Description

Design - T band Job Description

Hi,

Here the placement for Design - T band Job Description

Key Result Area’s:

• Design.
• Capital Efficiency.
• Throughput Contribution.
• Operating Expense Control.

Job Description:

The position is in the Design Department . The incumbent will be responsible for:

• Preparation and checking of Design calculations of Pressure Vessels, Heat Exchangers and other Process Equipments according to national and international codes like ASME, TEMA, AD MERKBLATTER, PD 5500, etc.
• Preparation of detailed bill of materials and technical specifications for bought out items.
• Checking of fabrication drawings.
• Preparation of Material Take - Offs.
• Leading a team of engineers and draughts men.
• Ensuring quality and timeliness for MTO’s, drawings and after design documents.
• Co – Ordination and correspondence with client, Third party Inspection Agency, PE etc. for approval of design documents.

Requisite Qualification:

Essential:

• Graduate in Mechanical Engineering

Preferred:

• Post Graduate in Mechanical Engineering

Requisite Experience:

Essential:

• Normal 0 MicrosoftInternetExplorer4 10+ Years in Fabrication Industries dealing with Design of Heat Exchangers, Pressure Vessels, Columns, Reactors.
• Relevant experience in Design required as per International Codes like ASME, A D Merkblatter, TEMA, Pressure Equipment Directive Requirements, Chinese SQL Requirements,

Special Skills Required:

• Operating knowledge of BaaN, Autocad, PV Elite Software
• Knowledge of sequence of Manufacturing and processes, International codes & Procedures, ISO systems & procedures
• Experience of people management
• Leadership Quality & Interpersonal Skills.

Please send us your latest updated profile with contact nos.current & expected salary details and joining time required to priya@kbsconsultants.com
You may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants

Flat H,Kulothungan Apts,

No, 5 Natesan Road

Ashoknagar,

Chennai 600 083.

India.

Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com/
SAP ERP Jobs : http://www.jobsvista.com/
Core Engineering Jobs : http://www.gotachance.com/
Technology Jobs : http://www.kbsconsultants.com/
India Jobs : http://www.kbsconsultants.net.in/
http://www.kbsconsultants.org.in/

Job Description of P Band (Deputy Manager – Manufacturing Assembly)

Job Description of P Band (Deputy Manager – Manufacturing Assembly)

Hi,

Here the placement for Job Description of P Band (Deputy Manager –Manufacturing Assembly)

POSITION : Deputy Manager

Key Result Area’s:

• Throughput Contribution
• On time Delivery
• Innovation and Newness
• Cost Control
• Safety and Housekeeping

Job Description:

• The positions are in the manufacturing Department of Process Equipment Division.

The incumbent will be responsible for the following roles and responsibilities:

• Meeting the delivery commitments of the customers
• Multi Skilling of the workmen.
• Ensuring the required level of Discipline and Productivity.
• Meeting the quality requirement of the customers and reducing the cost.
• Continuously improving the processes.
• Maintaining the shop floor discipline and safe work environment in the department.

REQUISITE QUALIFICATIONS:

Essential :

• B.E / B.Tech/ Diploma in Mechanical / Production/Fabrication Technology

REQUISITE EXPERIENCE

Essential:

• 5- 7 years of work exp

Preferred:

• Minimum 5 years experience in Fabrication of Heat Exchangers, Columns and Pressure Vessels.

Special Skills Required:

• Knowledge of welding and gas cutting with respect to heavy fabrication work.
• Knowledge of machining and assembly of fabricating components.
• Knowledge of various fabrication codes like ASME, TEMA, DIN.
• Knowledge of various International NDT Methods.
• Knowledge of Job Planning and Sequencing.

Please send us your latest updated profile with contact nos.
current & expected salary details and joining time required to priya@kbsconsultants.com

You may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants
Flat H,Kulothungan Apts,
No, 5 Natesan Road
Ashoknagar,
Chennai 600 083.
India.
Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com

SAP ERP Jobs : http://www.jobsvista.com

Core Engineering Jobs : http://www.gotachance.com

Technology Jobs : http://www.kbsconsultants.com

India Jobs : http://www.kbsconsultants.net.in

http://www.kbsconsultants.org.in

International Sales & Marketing ( P Band Sales and Mktg)

International Sales & Marketing ( P Band Sales and Mktg)

Hi,

Here the placement for International Sales & Marketing ( P Band Sales and Mktg)

KRA’s:

• Throughput Contribution.
• Capital Efficiency.
• Operating Expense Control.

Job Description:

• The vacancy is in the Sales & Marketing department of PED.

The incumbent will be responsible for:

• Generating profitable orders.
• Keep update of market intelligence relevant to the process industry.
• Develop close working relationship with Domestic & International customers.
• Develop working relationship with inter functional departments viz.
• Design & Estimation,PMC,Manufacturing.
• Training & Development of subordinates on a continous basis.
• Make presentation to the clients.

Essential Qualification:

• B.E / B.Tech/ Diploma in (Mech /Prod/ Chem / Metallurgy)

Essential Experience :

• 5 - 7 years in Fabrication industry with an exposure in Marketing

Preferred Experience:

• Critical Process Equipment

Special Skills Required:

• Product Knowledge (Namely Heat Exchanger,Reactor & Vessels,Tower Internals & Trays,etc.
• Market Knowledge.

Please send us your latest updated profile with contact nos.current & expected salary details and joining time required to priya@kbsconsultants.com
You may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants

Flat H,Kulothungan Apts,

No, 5 Natesan Road

Ashoknagar,

Chennai 600 083.

India.

Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com
SAP ERP Jobs : http://www.jobsvista.com
Core Engineering Jobs : http://www.gotachance.com
Technology Jobs : http://www.kbsconsultants.com
India Jobs : http://www.kbsconsultants.net.in
http://www.kbsconsultants.org.in

Manager - Sales - Chennai

Manager - Sales - Chennai

Hi,
Here the placement for Manager - Sales - Chennai.
POSITION : Sales Manager
LOCATION : Chennai

• Our clients, is a leading starch manufacturer with operations in various parts of India.
• They produce a diverse range of food and industrial ingredients made from renewable resource corn (maize).
• Turnover of the company : Rs.600 crores.
• They have four manufacturing Units & four Branches all over India.

Job Profile :

Position : Manager - Sales

Placement : Chennai

Qualification: Science Gradutate with Post Graduation in Management

Age - 35-40

Experience - 10-15 years

• Knowledge of South Indian Markets - preferably in Food/ pharmaceutical / dairy products / Chemicals

CTC - depending upon qualification & experience

Please send us your latest updated profile with contact nos.current & expected salary details and joining time required to priya@kbsconsultants.com

You may also suggest this opening to your friends who may be interested.

Further Information:

KBS Consultants
Flat H,Kulothungan Apts,
No, 5 Natesan Road
Ashoknagar,
Chennai 600 083.
India.
Phone: +91-44 2489 5341 / 2371 9622

Visit Our Sites:

International jobs: http://www.jobsearchworld.com

SAP ERP Jobs : http://www.jobsvista.com

Core Engineering Jobs : http://www.gotachance.com

Technology Jobs : http://www.kbsconsultants.com

India Jobs : http://www.kbsconsultants.net.in

http://www.kbsconsultants.org.in